Product Catalog
HAKA Plast's hand made PE pressure fittings
| Raw material: | PE100, PE100-RC |
| Standard: | EN12201 – 3 : 2011+A1:2012 |
| Standard description: | Plastic piping systems for water supply, and for drainage and sewerage under pressure |
| Documents: | Certificates |
| Installation: | Installation guidelines |
| Allowed angle tolerance: | ±2° |
PE segmented BEND 30°
| D (mm) | 1p (mm) | 1L (mm) |
|---|---|---|
| 90 | 175 | 150 |
| 110 | 180 | 150 |
| 125 | 184 | 150 |
| 140 | 188 | 150 |
| 160 | 193 | 150 |
| 180 | 250 | 200 |
| 200 | 250 | 200 |
| 225 | 261 | 200 |
| 250 | 267 | 200 |
| 280 | 276 | 200 |
| 315 | 385 | 300 |
| 355 | 396 | 300 |
| 400 | 408 | 300 |
| 450 | 721 | 600 |
| 500 | 734 | 600 |
| 560 | 751 | 600 |
| 630 | 769 | 600 |
PE segmented BEND 45°
| D (mm) | 1p (mm) | 1L (mm) | 2p (mm) | 2L (mm) |
|---|---|---|---|---|
| 90 | 168 | 150 | 136 | 100 |
| 110 | 172 | 150 | 194 | 150 |
| 125 | 175 | 150 | 200 | 150 |
| 140 | 178 | 150 | 206 | 150 |
| 160 | 232 | 200 | 264 | 200 |
| 180 | 236 | 200 | 272 | 200 |
| 200 | 240 | 200 | 280 | 200 |
| 225 | 245 | 200 | 290 | 200 |
| 250 | 250 | 200 | 300 | 200 |
| 280 | 256 | 200 | 312 | 200 |
| 315 | 363 | 300 | 374 | 238 |
| 355 | 371 | 300 | 379 | 248 |
| 400 | 380 | 300 | 420 | 260 |
| 450 | 590 | 600 | 680 | 500 |
| 500 | 700 | 600 | 700 | 500 |
| 560 | 712 | 600 | 724 | 500 |
| 630 | 726 | 600 | 752 | 500 |
PE segmented BEND 60°
| D (mm) | 1p (mm) | 1L (mm) | 2p (mm) | 2L (mm) |
|---|---|---|---|---|
| 90 | 175 | 150 | 199 | 100 |
| 110 | 180 | 150 | 209 | 150 |
| 125 | 184 | 150 | 217 | 150 |
| 140 | 188 | 150 | 226 | 150 |
| 160 | 193 | 150 | 236 | 150 |
| 180 | 249 | 200 | 247 | 150 |
| 200 | 254 | 200 | 258 | 150 |
| 225 | 261 | 200 | 271 | 150 |
| 250 | 267 | 200 | 284 | 150 |
| 280 | 276 | 200 | 301 | 150 |
| 315 | 384 | 300 | 368 | 200 |
| 355 | 396 | 300 | 391 | 200 |
| 400 | 408 | 300 | 415 | 200 |
| 450 | 721 | 600 | 742 | 500 |
| 500 | 734 | 600 | 768 | 500 |
| 560 | 751 | 600 | 802 | 500 |
| 630 | 769 | 600 | 638 | 500 |
PE segmented BEND 90°
| D (mm) | 1p (mm) | 1L (mm) | 2p (mm) | 2L (mm) |
|---|---|---|---|---|
| 90 | 175 | 150 | 189 | 140 |
| 110 | 180 | 150 | 199 | 140 |
| 125 | 184 | 150 | 207 | 140 |
| 140 | 188 | 150 | 216 | 140 |
| 160 | 193 | 150 | 226 | 140 |
| 180 | 249 | 200 | 247 | 150 |
| 200 | 254 | 200 | 258 | 150 |
| 225 | 261 | 200 | 271 | 150 |
| 250 | 267 | 200 | 284 | 150 |
| 280 | 276 | 200 | 301 | 150 |
| 315 | 385 | 300 | 319 | 150 |
| 355 | 396 | 300 | 341 | 150 |
| 400 | 408 | 300 | 365 | 150 |
| 450 | 721 | 600 | 742 | 500 |
| 500 | 734 | 600 | 768 | 500 |
| 560 | 712 | 600 | 724 | 500 |
| 630 | 726 | 600 | 752 | 500 |
PE segmented TEE 45°
| D (mm) | Z (mm) | 1L (mm) | 2L (mm) | 3L (mm) |
|---|---|---|---|---|
| 90 | 538 | 150 | 350 | 260 |
| 110 | 546 | 150 | 350 | 240 |
| 125 | 552 | 150 | 350 | 225 |
| 140 | 608 | 150 | 400 | 260 |
| 160 | 617 | 150 | 400 | 240 |
| 180 | 675 | 200 | 400 | 220 |
| 200 | 683 | 200 | 400 | 200 |
| 225 | 745 | 200 | 450 | 229 |
| 250 | 854 | 200 | 550 | 300 |
| 280 | 865 | 200 | 550 | 270 |
| 315 | 1030 | 300 | 600 | 285 |
PE segmented TEE 90°
| D (mm) | 1L (mm) | Z (mm) |
|---|---|---|
| 90 | 150 | 390 |
| 110 | 150 | 410 |
| 125 | 150 | 425 |
| 140 | 150 | 440 |
| 160 | 150 | 460 |
| 180 | 200 | 580 |
| 200 | 200 | 600 |
| 225 | 200 | 625 |
| 250 | 200 | 650 |
| 280 | 200 | 680 |
| 315 | 300 | 915 |
| 355 | 600 | 1555 |
| 400 | 600 | 1600 |
| 450 | 650 | 1750 |
| 500 | 700 | 1900 |
| 560 | 700 | 1960 |
| 630 | 700 | 2030 |
Non-standard hand made PE pressure fittings
HAKA Plast can also offer its clients unusual solutions. For example, if during excavation works an unexpected obstacle occurs, then HAKA Plast, in cooperation with the client, can offer as a special solution a pipe connection, which will help to get around the obstacle.
PE pressure fittings are made according to the order.
© HAKA Plast | Tööstuse 35, 45201, Kadrina, Estonia | hakaplast[at]hakaplast.ee
